{"id":2541,"date":"2026-11-17T09:10:00","date_gmt":"2026-11-17T01:10:00","guid":{"rendered":"https:\/\/lemaele.com\/blog\/push-button-cap-sink-mark-inspection\/"},"modified":"2026-11-16T01:45:09","modified_gmt":"2026-11-15T17:45:09","slug":"push-button-cap-sink-mark-inspection","status":"publish","type":"post","link":"https:\/\/lemaele.com\/de\/blog\/push-button-cap-sink-mark-inspection\/","title":{"rendered":"Push Button Cap Sink Marks: A Practical Incoming Inspection Guide"},"content":{"rendered":"<style>.lema-article{min-width:0;max-width:100%;overflow-wrap:anywhere}.lema-article img{max-width:100%;height:auto}.lema-table{max-width:100%;overflow-x:auto}.lema-table table{border-collapse:collapse;min-width:640px;width:100%}.lema-table th,.lema-table td{padding:12px;border:1px solid #ddd;text-align:left;vertical-align:top}.lema-video{position:relative;padding-bottom:56.25%;height:0}.lema-video iframe{position:absolute;inset:0;width:100%;height:100%;border:0}<\/style>\n<div class=\"lema-article\">\n<p>Push button cap sink mark inspection begins with a controlled comparison of the actual cap surface, an approved reference and the agreed cosmetic requirement. A suspected sink mark is a local depression; a dark reflection alone does not establish a depression or its manufacturing cause. Record the location, viewing conditions and sample identity before deciding whether measurement or supplier investigation is needed. This guide gives OEM buyers an inspection workflow for a PBS series inquiry. It does not claim that a pictured PBS product has a defect, identify its resin or prescribe a universal permissible sink depth.<\/p>\n<h2>Identify the cap and the surface that matters<\/h2>\n<p>Start with the exact configuration on the order. The <a href=\"https:\/\/lemaele.com\/product\/pbs-series-push-button-switch\/\" rel=\"noopener\">PBS series push button switch<\/a> page identifies the relevant Lemaele family, but a family image cannot replace the approved cap drawing or cosmetic reference. Confirm cap colour, shape, operating face and revision. Compare the delivered version with the same version, since differences between designs may be intentional.<\/p>\n<p>Define the inspection zone on a photograph or drawing. An operator-visible cap face may have a different cosmetic requirement from a concealed underside. State whether the bezel is included. Keep a moulded depression distinct from an intentional recess, lettering feature or curved profile. An inspector should not have to guess which surfaces the purchasing agreement treats as appearance-critical.<\/p>\n<p>Use the <a href=\"https:\/\/lemaele.com\/blog\/industrial-push-button-switch-selection-guide\/\">industrial push button selection guide<\/a> for the wider selection decisions. Appearance review is one part of that process. Contact arrangement, mounting fit and application suitability need their own records. A cosmetic approval should never silently become approval of the complete control or permission to omit the functional checks required by the equipment design.<\/p>\n<h2>Make a suspected depression repeatably visible<\/h2>\n<p>Inspect the reference and suspect sample together under the same light, background and viewing direction. A light source at an oblique angle can help reveal a local change in surface shape, but keep the setup consistent rather than hunting for the most dramatic photograph. Record how the part was oriented so another inspector can reproduce the observation.<\/p>\n<p>Move the viewing direction deliberately and note whether the apparent feature remains at the same physical location. A reflection may move across the surface as the observer moves. Preserve photographs of the whole cap and the specific region, with the sample identifier in the accompanying record. Do not mistake a shadow from the bezel for evidence of a moulding depression.<\/p>\n<p>Agree normal viewing conditions before accepting or rejecting production. Extremely close inspection under unusual lighting may reveal features that were never included in the purchase requirement. Conversely, a cap that passes a casual glance may fail an agreed visible-surface criterion. The purpose of a consistent setup is an interpretable decision, not making a feature look better or worse.<\/p>\n<figure><img decoding=\"async\" src=\"https:\/\/lemaele.com\/wp-content\/uploads\/2026\/11\/lema-push-button-cap-sink-mark-inspection-body1-20261116.webp\" alt=\"Close view of an intact yellow PBS cap under oblique illumination\" loading=\"lazy\" width=\"1536\" height=\"1024\" title=\"\"><figcaption>Close view of an intact yellow PBS cap under oblique illumination. Product-reference illustration; not a test result or approved test fixture.<\/figcaption><\/figure>\n<div class=\"lema-table\">\n<table>\n<thead>\n<tr>\n<th>Evidence item<\/th>\n<th>What to verify<\/th>\n<th>Decision supported<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Configuration<\/td>\n<td>Match cap version and revision<\/td>\n<td>Compare like products<\/td>\n<\/tr>\n<tr>\n<td>Viewing<\/td>\n<td>Agree lighting, orientation and visible zone<\/td>\n<td>Repeat the visual assessment<\/td>\n<\/tr>\n<tr>\n<td>Measurement<\/td>\n<td>Define reference surface and method if needed<\/td>\n<td>Interpret a profile result<\/td>\n<\/tr>\n<tr>\n<td>Sampling<\/td>\n<td>Link each observation to a specimen and lot<\/td>\n<td>Bound the shipment decision<\/td>\n<\/tr>\n<tr>\n<td>Disposition<\/td>\n<td>Record approval, replacement or concession<\/td>\n<td>Control future orders<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<h2>Distinguish the observation from its possible cause<\/h2>\n<p>The <a href=\"https:\/\/archive.nptel.ac.in\/content\/storage2\/courses\/112107085\/module4\/lecture5\/lecture5.pdf\" rel=\"noopener\" target=\"_blank\">NPTEL injection moulding lecture<\/a> describes the sequence of filling, cooling and ejection and includes sink marks among moulding defects. That background explains why a moulded surface warrants review. It does not establish the process used for a particular PBS cap or identify a cause from a product photograph.<\/p>\n<p>A <a href=\"https:\/\/scholarworks.wmich.edu\/masters_theses\/5324\/\" rel=\"noopener\" target=\"_blank\">Western Michigan University thesis abstract on sink marks<\/a> describes research relating product and process variables to attribute defects. The useful purchasing implication is to request a structured investigation with identified samples. A general research model is not a ready-made acceptance rule for a different resin, tool or finished part. Review the supplier evidence for the actual configuration.<\/p>\n<p>Record the visible feature in neutral language: its location, extent and whether a depression was confirmed. Possible links to local geometry, cooling or packing remain investigation questions until supported by manufacturing evidence. Avoid telling a supplier to increase a process setting based solely on incoming inspection. A change that improves one appearance feature may affect other characteristics that also require validation.<\/p>\n<h2>Choose measurement only when it answers the requirement<\/h2>\n<p>If the contract requires a depth or profile result, ask the inspection provider to propose a suitable method for the small curved face. The report should identify the reference surface, measurement path and instrument capability. A straightedge placed arbitrarily across a domed cap does not create a meaningful nominal plane. Agree what quantity is being assessed before reporting a number.<\/p>\n<p>Do not infer a numerical depth from an ordinary photograph. Perspective, reflections and exposure can change the apparent size of a feature. Photographs support location and comparison; a validated measurement process supports dimensional claims. Where only visual acceptance is required, an approved physical master may provide a more useful decision basis than an unexplained instrument reading.<\/p>\n<p>Preserve individual results and specimen identities. When several positions are inspected, map each position to the same reference scheme. Record whether the cap is assembled or separate and how it is supported. Any special preparation must be disclosed, since cutting, clamping or removing the cap can change the specimen and may prevent a direct comparison with delivered assemblies.<\/p>\n<h2>Keep sink marks separate from other appearance issues<\/h2>\n<p>The <a href=\"https:\/\/lemaele.com\/blog\/push-button-clear-cap-abrasion-haze\/\">cap abrasion and haze guide<\/a> addresses optical surface condition rather than local surface shape. A change in reflected appearance can make a region conspicuous without proving a depression. If both questions are present, preserve the same sample identity and assess each against its own requirement. Do not use a gloss result as a substitute for a profile measurement.<\/p>\n<p>Use the <a href=\"https:\/\/lemaele.com\/blog\/push-button-cap-color-batch-consistency\/\">cap colour batch consistency guide<\/a> when colour varies between samples. Colour, scratches, haze and a suspected sink mark may coexist, but grouping them into one defect label makes root-cause review less useful. Describe the separate observations and indicate which one triggered the rejection or request for further investigation.<\/p>\n<p>Inspect operation separately when a feature is close to an interface or the operating surface. Do not assume that a visible depression causes binding, and do not assume that free movement makes every cosmetic difference acceptable. Ask the responsible engineer which fit or operating check is required. Cosmetic and functional evidence can inform the same disposition while remaining distinct records.<\/p>\n<h2>Build a sampling record that supports a lot decision<\/h2>\n<p>Use the sampling plan agreed for the delivery rather than selecting only the most attractive or most obvious specimens. Record order, lot, quantity inspected and the selection method. If no plan exists, document the limited sample and seek a quality decision before extrapolating to the whole shipment. Several photographs of one cap are not evidence from several independent caps.<\/p>\n<p>Keep an identified acceptable reference and any agreed borderline sample available to both parties. Store them so handling, dirt and surface damage do not change the comparison. Record their approval and replacement history. An old reference that has been polished or scratched through repeated handling may no longer represent the basis originally agreed for production acceptance.<\/p>\n<p>When a difference appears within a shipment, retain the location or packaging identifiers available for the affected specimens. Ask the supplier whether further traceability can distinguish the groups. Do not invent a cavity or process-batch attribution if that information is unavailable. A clear limited record is more useful than a confident but unsupported explanation of the distribution.<\/p>\n<figure><img decoding=\"async\" src=\"https:\/\/lemaele.com\/wp-content\/uploads\/2026\/11\/lema-push-button-cap-sink-mark-inspection-body2-20261116.webp\" alt=\"Two yellow PBS switches beside separate blank specimen cards\" loading=\"lazy\" width=\"1536\" height=\"1024\" title=\"\"><figcaption>Two yellow PBS switches beside separate blank specimen cards. Product-reference illustration; not a test result or approved test fixture.<\/figcaption><\/figure>\n<h2>Request a corrective response with defined evidence<\/h2>\n<p>Send the supplier the order reference, configuration, sample map and comparison photographs. State the requirement believed to be unmet and include any measurement report. Ask for confirmation of the observation, the investigation scope and the proposed disposition. Separate immediate containment of identified stock from a permanent manufacturing change, since they solve different parts of the problem.<\/p>\n<p>If a process or tool change is proposed, ask which characteristics will be rechecked on the revised samples. Appearance improvement should be assessed alongside the applicable dimensional and operating requirements. Specify who approves the new reference and whether existing stock is covered by that approval. A revised sample should not quietly replace the contractual master without an agreed change record.<\/p>\n<p>Avoid unapproved rework such as heating, polishing or applying a coating to hide the feature. Such changes may alter appearance, dimensions or material condition and destroy investigation evidence. A purchaser can hold stock for review without attempting a repair. Any approved rework needs a defined method, traceability and acceptance checks appropriate to the final supplied configuration.<\/p>\n<h2>Put the agreed result into the next purchase order<\/h2>\n<p>Close the review with a written decision: accepted against the existing reference, replaced, held for additional evidence or accepted under a specific concession. Identify the affected order and samples. A concession for a particular delivery should not become a permanent relaxation unless the responsible parties approve that change. Retain the original observation with the final decision.<\/p>\n<p>For repeat orders, state the controlled cap configuration, appearance reference, viewing conditions and any separately agreed measurement method. Include the action for borderline cases and the owner of that decision. If numerical limits are needed, have engineering and the inspection provider establish defensible values. This article intentionally supplies no universal sink-depth limit for PBS or other button caps.<\/p>\n<p>A useful inquiry to Lemaele therefore includes the selected PBS version, required finish, sample approval process and the evidence expected with production. This gives the supplier a concrete request to answer. Keep electrical ratings, installation requirements and equipment validation in the wider specification so a successful appearance comparison remains one documented part of a complete sourcing decision.<\/p>\n<h2>Further learning<\/h2>\n<p>This NPTEL-NOC IITM lecture introduces injection moulding and plastic-part design. It provides process context for a supplier discussion, not a PBS inspection specification or evidence of a particular defect.<\/p>\n<div class=\"lema-video\"><iframe src=\"https:\/\/www.youtube-nocookie.com\/embed\/QxZ54WgYhnA\" title=\"#19Introduction To Injection Molding Process|Terminology Related To Plastic Parts&amp;Design Guidelines\" loading=\"lazy\" allow=\"encrypted-media; picture-in-picture\" allowfullscreen><\/iframe><\/div>\n<h2>Frequently asked questions<\/h2>\n<h3>Does a dark patch prove a sink mark?<\/h3>\n<p>No. Check the physical location under consistent viewing conditions and distinguish reflections from a surface depression.<\/p>\n<h3>What sink depth is acceptable for PBS caps?<\/h3>\n<p>No universal value is established here. Agree the appearance requirement and any measurement criterion for the selected configuration.<\/p>\n<h3>Can a photo identify the moulding cause?<\/h3>\n<p>A photo documents an observation. Manufacturing and specimen evidence are needed before assigning a process cause.<\/p>\n<h3>Does an accepted cap appearance prove switch performance?<\/h3>\n<p>No. Electrical, mounting and operating qualification need separate checks appropriate to the application.<\/p>\n<\/div>\n<p><script type=\"application\/ld+json\">{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Does a dark patch prove a sink mark?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. Check the physical location under consistent viewing conditions and distinguish reflections from a surface depression.\"}}, {\"@type\": \"Question\", \"name\": \"What sink depth is acceptable for PBS caps?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No universal value is established here. Agree the appearance requirement and any measurement criterion for the selected configuration.\"}}, {\"@type\": \"Question\", \"name\": \"Can a photo identify the moulding cause?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A photo documents an observation. Manufacturing and specimen evidence are needed before assigning a process cause.\"}}, {\"@type\": \"Question\", \"name\": \"Does an accepted cap appearance prove switch performance?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. Electrical, mounting and operating qualification need separate checks appropriate to the application.\"}}]}<\/script><\/p>\n","protected":false},"excerpt":{"rendered":"<p>Inspect push button cap sink marks with consistent viewing, approved samples and traceable evidence. Prepare a clear PBS cosmetic inspection request.<\/p>","protected":false},"author":9,"featured_media":2538,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[54],"class_list":["post-2541","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blog","tag-push-button-switch"],"_links":{"self":[{"href":"https:\/\/lemaele.com\/de\/wp-json\/wp\/v2\/posts\/2541","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/lemaele.com\/de\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/lemaele.com\/de\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/lemaele.com\/de\/wp-json\/wp\/v2\/users\/9"}],"replies":[{"embeddable":true,"href":"https:\/\/lemaele.com\/de\/wp-json\/wp\/v2\/comments?post=2541"}],"version-history":[{"count":1,"href":"https:\/\/lemaele.com\/de\/wp-json\/wp\/v2\/posts\/2541\/revisions"}],"predecessor-version":[{"id":2542,"href":"https:\/\/lemaele.com\/de\/wp-json\/wp\/v2\/posts\/2541\/revisions\/2542"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/lemaele.com\/de\/wp-json\/wp\/v2\/media\/2538"}],"wp:attachment":[{"href":"https:\/\/lemaele.com\/de\/wp-json\/wp\/v2\/media?parent=2541"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/lemaele.com\/de\/wp-json\/wp\/v2\/categories?post=2541"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/lemaele.com\/de\/wp-json\/wp\/v2\/tags?post=2541"}],"curies":[{"name":"WP","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}